Showing 1–16 of 67 results
Aerosol Spray Citrus Extract Based Adhesive & General Purpose Cleaner
Citrus-extract based adhesive remover spray can for removing adhesive residues from finished parts and equipment.
Read moreHELMITIN HARDENER 560 is a crosslinking agent used in conjunction with waterborne polyurethane dispersions such as HELMIBOND 859 and HELMIBOND 866 to increase the heat and water resistance, bond strength and long term performance of the adhesive. ✓ Provides excellent heat resistance ✓ Greatly improves water resistance and long-term adhesion Product Data Sheet (E) Safety […]
Read moreHELMITIN HARDENER 561 is a crosslinking agent used in conjunction with waterborne polyurethane dispersions to increase the heat and water resistance, bond strength and long term performance of the adhesive. ✓ Provides excellent heat resistance. ✓ Greatly improves water resistance and long-term adhesion Product Data Sheet (E) Safety Data Sheet (E) Safety Data Sheet (F)
Read moreHelmibond 884WH is a one-part waterborne polyurethane adhesive used for membrane pressing or vacuum forming thermoplastic foils in the manufacture of kitchen cabinet doors, furniture components and other 3D applications. ✓ One-part – no mixing of hardener and long pot life ✓ Reactivation can take place long after parts have been sprayed ✓ High initial […]
Read moreHelmibond 590 is a hardener/catalyst that is used in conjunction with some PVA emulsions. It provides increased bond strength, improved heat resistance and increased water resistance when compared to conventional PVA products. • Non-flammable • Easy mixing • Good heat and water resistance Product Data Sheet (E) Safety Data Sheet (E)
Read moreHELMIBOND 775 is a waterborne contact adhesive with aggressive tack, high heat resistance and excellent bond strength. This versatile adhesive can be brush, roller, or spray applied. Suitable for post-forming and flat applications. ✓ Solvent-free with zero VOCs ✓ High solids content for excellent coverage and fast dry times ✓ Long open time ✓ Immediate […]
Read moreHELMIBOND 805 is a radio-frequency curable, pre-catalyzed PVA adhesive with Type II water resistance. Its long working Times and short press time make HELMIBOND 805 ideal for hot and cold pressing decorative overlays to particleboard and MDF. An excellent choice as well for wood assembly applications where water resistance is needed. ✓ Excellent machining on […]
Read moreHELMIBOND 816 is a fast setting pre-catalyzed PVA designed to have minimal bleed-through in hard wood veneering applications. ✓ Environmentally friendly ✓ Fast setting ✓ Type II water resistance ✓ Non-staining ✓ Excellent adhesion to a variety of substrates including but not limited to HPL, veneer, particleboard, plywood, MDF, etc Product Data Sheet (E) Safety […]
Read moreHELMIBOND 833 is a one part Type I water-resistant PVA adhesive. It is very fast setting with a long assembly time and good wet tack. It can also be hot pressed and used in applications that are radio frequency cured. ✓ Excellent water resistance ✓ Rigid bonds ✓ Fast drying ✓ Good wet tack Product […]
Read moreHELMIBOND 834 is a waterborne PVA adhesive designed for doweling applications. The low viscosity makes it ideal for automatic dowel insertion applications. HELMIBOND 834 is fast drying and dries to a tough film. ✓ Fast drying ✓ For injection or spray applications ✓ High solids Product Data Sheet (E) Safety Data Sheet (E) Safety Data […]
Read moreHELMIBOND 842 is a specially formulated PVA adhesive which features long open and closed working times but short press times. High tack and extended working time make it an excellent choice as a general purpose assembly adhesive PVA. ✓ Long closed working time; up to 20 minutes depending on materials ✓ Short press times; as […]
Read moreHELMIBOND 847 is a premium quality, fast setting, unextended, high strength PVA adhesive specifically designed for solid wood bonding. ✓ Fast setting ✓ No fillers – Tight, invisible glue lines ✓ High solids – Reduces/eliminates sunken glue lines ✓ High shear strength ✓ Versatile – Can be used to bond HPL, veneer, particle board, MDF […]
Read moreHELMIBOND 852 is a waterborne polyurethane adhesive used for membrane pressing or vacuum forming thermoplastic foils in the manufacture of kitchen cabinet doors, furniture components and other 3D applications. It is used in conjunction with 5% HELMITIN HARDENER 560. ✓ Ideal for Kolmag and other high temperature presses ✓ Excellent for parts with deep draw […]
Read moreHELMIBOND 853 is a PVA used in conjunction with CATALYST 590 for Type II water resistance. It is fast setting and used for hot pressing, cold pressing, RF and general assembly. ✓ Fast setting ✓ Type II water resistance ✓ Non-staining ✓ High shear strength ✓ Good heat resistance ✓ Excellent machining characteristics ✓ Bonds […]
Read moreHELMIBOND 855 is a waterborne polyurethane adhesive used for membrane pressing or vacuum forming PVC foils in the manufacture of kitchen cabinet doors, furniture components and other 3D applications. It is used in conjunction with 5% HELMITIN HARDENER 560 to provide increased heat and water resistance. ✓ Waterborne ✓ Good heat and water resistance ✓ […]
Read moreHELMIBOND 856 is an extremely fast setting, wood assembly adhesive designed for use in high speed assembly processes where short clamping times are necessary. ✓ Extremely fast setting – Allows for much shorter clamp times ✓ High tack for general assembly glue & staple applications ✓ High shear strength – Suitable for high stress, solid […]
Read more