Showing 1–16 of 38 results
Aerosol Spray Citrus Extract Based Adhesive & General Purpose Cleaner
Citrus-extract based adhesive remover spray can for removing adhesive residues from finished parts and equipment.
Read moreHelmibond 590 is a hardener/catalyst that is used in conjunction with some PVA emulsions. It provides increased bond strength, improved heat resistance and increased water resistance when compared to conventional PVA products. • Non-flammable • Easy mixing • Good heat and water resistance Product Data Sheet (E) Safety Data Sheet (E)
Read more
HELMIBOND 775 is a waterborne contact adhesive with aggressive tack, high heat resistance and excellent bond strength. This versatile adhesive can be brush, roller, or spray applied. Suitable for post-forming and flat applications. ✓ Solvent-free with zero VOCs ✓ High solids content for excellent coverage and fast dry times ✓ Long open time ✓ Immediate […]
Read more
HELMIBOND 805 is a radio-frequency curable, pre-catalyzed PVA adhesive with Type II water resistance. Its long working Times and short press time make HELMIBOND 805 ideal for hot and cold pressing decorative overlays to particleboard and MDF. An excellent choice as well for wood assembly applications where water resistance is needed. ✓ Excellent machining on […]
Read more
HELMIBOND 816 is a fast setting pre-catalyzed PVA designed to have minimal bleed-through in hard wood veneering applications. ✓ Environmentally friendly ✓ Fast setting ✓ Type II water resistance ✓ Non-staining ✓ Excellent adhesion to a variety of substrates including but not limited to HPL, veneer, particleboard, plywood, MDF, etc Product Data Sheet (E) Safety […]
Read more
HELMIBOND 833 is a one part Type I water-resistant PVA adhesive. It is very fast setting with a long assembly time and good wet tack. It can also be hot pressed and used in applications that are radio frequency cured. ✓ Excellent water resistance ✓ Rigid bonds ✓ Fast drying ✓ Good wet tack Product […]
Read more
HELMIBOND 834 is a waterborne PVA adhesive designed for doweling applications. The low viscosity makes it ideal for automatic dowel insertion applications. HELMIBOND 834 is fast drying and dries to a tough film. ✓ Fast drying ✓ For injection or spray applications ✓ High solids Product Data Sheet (E) Safety Data Sheet (E) Safety Data […]
Read more
HELMIBOND 842 is a specially formulated PVA adhesive which features long open and closed working times but short press times. High tack and extended working time make it an excellent choice as a general purpose assembly adhesive PVA. ✓ Long closed working time; up to 20 minutes depending on materials ✓ Short press times; as […]
Read more
HELMIBOND 847 is a premium quality, fast setting, unextended, high strength PVA adhesive specifically designed for solid wood bonding. ✓ Fast setting ✓ No fillers – Tight, invisible glue lines ✓ High solids – Reduces/eliminates sunken glue lines ✓ High shear strength ✓ Versatile – Can be used to bond HPL, veneer, particle board, MDF […]
Read more
HELMIBOND 853 is a PVA used in conjunction with CATALYST 590 for Type II water resistance. It is fast setting and used for hot pressing, cold pressing, RF and general assembly. ✓ Fast setting ✓ Type II water resistance ✓ Non-staining ✓ High shear strength ✓ Good heat resistance ✓ Excellent machining characteristics ✓ Bonds […]
Read more
HELMIBOND 856 is an extremely fast setting, wood assembly adhesive designed for use in high speed assembly processes where short clamping times are necessary. ✓ Extremely fast setting – Allows for much shorter clamp times ✓ High tack for general assembly glue & staple applications ✓ High shear strength – Suitable for high stress, solid […]
Read more
A versatile vinyl acetate adhesive with excellent bonds to a wide range of materials in addition to wood. Designed primarily for use with automated and manual postforming machinery, Helmibond 890 can be sprayed or roll coated for use in hot bonding, hot pressing, hot roll laminating, cold pressing and “pinch roll & stack” flat laminating […]
Read more
Helmiprene 4535 is a flammable brush/roller grade polychloroprene contact adhesive with a higher viscosity to minimize soak-in on porous substrates. Fast drying with aggressive initial tack and open time. ✓ High viscosity prevents soak-in on porous substrates ✓ Minimal sag on vertical surfaces ✓ Excellent room temperature contact bonds ✓ Excellent green strength ✓ High […]
Read more
Helmiprene 4545 is a flammable spray grade polychloroprene contact adhesive with a low viscosity for excellent spray characteristics. Fast drying with aggressive tack and high heat resistance. Suitable for postforming and flat applications. ✓ Excellent green strength and high heat resistance for postforming applications ✓ Fast drying with a long open time ✓ Excellent spray […]
Read more
HELMIPRENE 4560 is a premium flammable spray grade polychloroprene contact adhesive that is fast drying with high heat resistance and excellent green strength for postforming and flat work. A workhorse product designed for a variety of applications. ✓ Excellent room temperature contact bonds ✓ Excellent green strength and high heat resistance for postforming applications ✓ […]
Read more
HELMIPRENE 4562 is a high performance polychloroprene spray-grade contact cement designed for versatility, that is fast drying with high heat resistance and excellent for hand spraying operations and high speed automated postforming lines. ✓ Excellent room temperature contact bonds ✓ Excellent Green Strength and high heat resistance for high speed postforming applications ✓ Fast drying […]
Read more