Showing 1–16 of 45 results
Aerosol Spray Citrus Extract Based Adhesive & General Purpose Cleaner
Citrus-extract based adhesive remover spray can for removing adhesive residues from finished parts and equipment.
Read moreHelmibond 590 is a hardener/catalyst that is used in conjunction with some PVA emulsions. It provides increased bond strength, improved heat resistance and increased water resistance when compared to conventional PVA products. • Non-flammable • Easy mixing • Good heat and water resistance Product Data Sheet (E) Safety Data Sheet (E)
Read moreHELMIBOND 775 is a waterborne contact adhesive with aggressive tack, high heat resistance and excellent bond strength. This versatile adhesive can be brush, roller, or spray applied. Suitable for post-forming and flat applications. ✓ Solvent-free with zero VOCs ✓ High solids content for excellent coverage and fast dry times ✓ Long open time ✓ Immediate […]
Read moreHELMIBOND 805 is a radio-frequency curable, pre-catalyzed PVA adhesive with Type II water resistance. Its long working Times and short press time make HELMIBOND 805 ideal for hot and cold pressing decorative overlays to particleboard and MDF. An excellent choice as well for wood assembly applications where water resistance is needed. ✓ Excellent machining on […]
Read moreHELMIBOND 816 is a fast setting pre-catalyzed PVA designed to have minimal bleed-through in hard wood veneering applications. ✓ Environmentally friendly ✓ Fast setting ✓ Type II water resistance ✓ Non-staining ✓ Excellent adhesion to a variety of substrates including but not limited to HPL, veneer, particleboard, plywood, MDF, etc Product Data Sheet (E) Safety […]
Read moreHELMIBOND 833 is a one part Type I water-resistant PVA adhesive. It is very fast setting with a long assembly time and good wet tack. It can also be hot pressed and used in applications that are radio frequency cured. ✓ Excellent water resistance ✓ Rigid bonds ✓ Fast drying ✓ Good wet tack Product […]
Read moreHELMIBOND 834 is a waterborne PVA adhesive designed for doweling applications. The low viscosity makes it ideal for automatic dowel insertion applications. HELMIBOND 834 is fast drying and dries to a tough film. ✓ Fast drying ✓ For injection or spray applications ✓ High solids Product Data Sheet (E) Safety Data Sheet (E) Safety Data […]
Read moreHELMIBOND 842 is a specially formulated PVA adhesive which features long open and closed working times but short press times. High tack and extended working time make it an excellent choice as a general purpose assembly adhesive PVA. ✓ Long closed working time; up to 20 minutes depending on materials ✓ Short press times; as […]
Read moreHELMIBOND 847 is a premium quality, fast setting, unextended, high strength PVA adhesive specifically designed for solid wood bonding. ✓ Fast setting ✓ No fillers – Tight, invisible glue lines ✓ High solids – Reduces/eliminates sunken glue lines ✓ High shear strength ✓ Versatile – Can be used to bond HPL, veneer, particle board, MDF […]
Read moreHELMIBOND 853 is a PVA used in conjunction with CATALYST 590 for Type II water resistance. It is fast setting and used for hot pressing, cold pressing, RF and general assembly. ✓ Fast setting ✓ Type II water resistance ✓ Non-staining ✓ High shear strength ✓ Good heat resistance ✓ Excellent machining characteristics ✓ Bonds […]
Read moreHELMIBOND 856 is an extremely fast setting, wood assembly adhesive designed for use in high speed assembly processes where short clamping times are necessary. ✓ Extremely fast setting – Allows for much shorter clamp times ✓ High tack for general assembly glue & staple applications ✓ High shear strength – Suitable for high stress, solid […]
Read moreA versatile vinyl acetate adhesive with excellent bonds to a wide range of materials in addition to wood. Designed primarily for use with automated and manual postforming machinery, Helmibond 890 can be sprayed or roll coated for use in hot bonding, hot pressing, hot roll laminating, cold pressing and “pinch roll & stack” flat laminating […]
Read moreTwo-Component (2K) Waterborne Spray Adhesive for immediate assembly in foam bonding, upholstery, fabric and other assembly applications. HELMIFAST 777 exhibits instant tack upon introduction of ACTIVATOR 7 to the spray process. MUST BE USED WITH ACTIVATOR 7 TO ACHIEVE PROPER ADHESIVE BOND. ✓ Immediate tack ✓ Excellent Green Strength ✓ Solvent-free, Zero VOCs ✓ Waterborne […]
Read moreOne-component waterborne spray adhesive for immediate assembly in foam bonding, upholstery, and other assembly applications. Helmifast 778 exhibits instant tack, excellent green strength, and repositionability. One-sided application is possible in many uses. ✓ Immediate tack ✓ Waterborne ✓ Solvent-free, zero VOCs ✓ Excellent green strength ✓ High heat resistance ✓ Aggressive tack; Helmifast 778 permits […]
Read moreHELMIFAST 779 is a one-component waterborne adhesive with fast grab and instant tacking properties. This adhesive is ideal for bonding foam, carpet, upholstery, insulation and other light-weight materials to MDF, particleboard, and lauan. Benefits: ✓ Instant tack and fast grab ✓ Waterborne (zero VOCs) ✓ Tough, flexible bonds ✓ Achieves one-way bond in various foam bonding […]
Read moreHELMIFAST 780 TURBO is a sprayable foam bonding adhesive designed to form immediate bonds in foam, mattress and upholstered furniture assembly applications. Used as a one-component adhesive, HELMIFAST 780 TURBO exhibits great performance in standard foam assembly applications. With a simple flick of a switch, transform HELMIFAST 780 TURBO instantly into a super aggressive, high performance, […]
Read more