Showing 1–16 of 26 results
Aerosol Spray Citrus Extract Based Adhesive & General Purpose Cleaner
Citrus-extract based adhesive remover spray can for removing adhesive residues from finished parts and equipment.
Read more
HELMITIN HARDENER 506 is a low viscosity liquid which,owing to its broad compatibility with many organic solvents such as methylene chloride, methyl ethyl ketone,acetone and toluene, can be easily mixed into most solvent-based adhesives. Since 506 reacts rapidly in the presence of moisture, adhesive systems must be free of water and alcohol.There is limited compatibility […]
Read moreWaterborne Pressure Sensitive Conductive/ Static Dissipative Flooring Adhesive
For installation of conductive and static dissipative resilient tile and sheet flooring, rubber tile and sheet flooring
Read more
HELMIBOND 750 is a waterborne natural rubber latex adhesive that provides very quick setting properties, making it ideal for combining various shoe upper materials such as leather, cloth, synthetic poromeric materials, cardboard, etc. This product exhibits excellent machining characteristics and may be easily applied by brush, spray or Schaefer roll coater. ✓ Waterborne ✓ Quick […]
Read more
HELMIBOND 771 is a waterborne natural rubber latex adhesive formulated with special resins that give this quality adhesive aggressive pressure sensitive tack. Excellent adhesion to a wide range of materials such as leather, cloth, synthetics and other man-made materials makes this a very versatile adhesive for many combining and folding operations. HELMIBOND 771 may easily […]
Read more
HELMIBOND 775 is a waterborne contact adhesive with aggressive tack, high heat resistance and excellent bond strength. This versatile adhesive can be brush, roller, or spray applied. Suitable for post-forming and flat applications. ✓ Solvent-free with zero VOCs ✓ High solids content for excellent coverage and fast dry times ✓ Long open time ✓ Immediate […]
Read more
HELMIBOND 805 is a radio-frequency curable, pre-catalyzed PVA adhesive with Type II water resistance. Its long working Times and short press time make HELMIBOND 805 ideal for hot and cold pressing decorative overlays to particleboard and MDF. An excellent choice as well for wood assembly applications where water resistance is needed. ✓ Excellent machining on […]
Read more
HELMIBOND 808 is a synthetic resin emulsion based adhesive that displays good wet tack and the high solids content makes it very versatile. It was developed to bond PVC extrusions and foils to a wide range of substrates in the manufacture of plastic edged shelving, furniture or plastic covered panels. It can also be used […]
Read more
HELMIBOND 833 is a one part Type I water-resistant PVA adhesive. It is very fast setting with a long assembly time and good wet tack. It can also be hot pressed and used in applications that are radio frequency cured. ✓ Excellent water resistance ✓ Rigid bonds ✓ Fast drying ✓ Good wet tack Product […]
Read more
Helmiplast 2526-2 polyurethane cement is used to bond various shoe materials such as leather, vinyl, urethane, rubbers, and most synthetic materials. It can also be used for direct injection molding of vinyl to cemented uppers. ✓ Easy to apply ✓ High initial bond strength ✓ Strong final bonds ✓ Excellent aging properties ✓ Heat, oil, […]
Read more
Two-Component (2K) Waterborne Spray Adhesive for immediate assembly in foam bonding, upholstery, fabric and other assembly applications. HELMIFAST 777 exhibits instant tack upon introduction of ACTIVATOR 7 to the spray process. MUST BE USED WITH ACTIVATOR 7 TO ACHIEVE PROPER ADHESIVE BOND. ✓ Immediate tack ✓ Excellent Green Strength ✓ Solvent-free, Zero VOCs ✓ Waterborne […]
Read more
One-component waterborne spray adhesive for immediate assembly in foam bonding, upholstery, and other assembly applications. Helmifast 778 exhibits instant tack, excellent green strength, and repositionability. One-sided application is possible in many uses. ✓ Immediate tack ✓ Waterborne ✓ Solvent-free, zero VOCs ✓ Excellent green strength ✓ High heat resistance ✓ Aggressive tack; Helmifast 778 permits […]
Read more
HELMIPLAST 2526 polyurethane cement is used to bond various shoe materials such as leather, vinyl, urethane, rubbers, and most synthetic materials. It can also be used for direct injection molding of vinyl to cemented uppers. ✓ Low heat reactivation ✓ High initial bond strength ✓ Strong final bonds ✓ Excellent aging properties ✓ Heat, oil, and […]
Read more
Helmiplast 2528 is an outstanding polyurethane cement that contains special elastomers to yield extremely strong bonds. This Quality adhesive displays excellent adhesion to various shoe materials such as leather, vinyl, urethane, rubbers and most synthetic materials. Helmiplast 2528 exhibits good heat, moisture and oil resistance as well as low temperature flexibility, and is also suitable […]
Read moreMetal Primer and Adhesion Promoter
2-part nonflammable metal primer for enhanced adhesion of polychloroprene contact adhesives to metal surfaces. Used with 4% CATALYST 506.
Read moreBelt Splicing and Tank Lining Adhesive
2-part, nonflammable, brush grade contact cement for bonding rubbers to themselves and to metal surfaces in conveyor belt splicing and tank lining applications. Used with 4% CATALYST 506.
Read more