Showing 1–16 of 47 results
Aerosol Spray Citrus Extract Based Adhesive & General Purpose Cleaner
Citrus-extract based adhesive remover spray can for removing adhesive residues from finished parts and equipment.
Read more
HELMIBOND 775 is a waterborne contact adhesive with aggressive tack, high heat resistance and excellent bond strength. This versatile adhesive can be brush, roller, or spray applied. Suitable for post-forming and flat applications. ✓ Solvent-free with zero VOCs ✓ High solids content for excellent coverage and fast dry times ✓ Long open time ✓ Immediate […]
Read more
HELMIBOND 805 is a radio-frequency curable, pre-catalyzed PVA adhesive with Type II water resistance. Its long working Times and short press time make HELMIBOND 805 ideal for hot and cold pressing decorative overlays to particleboard and MDF. An excellent choice as well for wood assembly applications where water resistance is needed. ✓ Excellent machining on […]
Read more
HELMIBOND 816 is a fast setting pre-catalyzed PVA designed to have minimal bleed-through in hard wood veneering applications. ✓ Environmentally friendly ✓ Fast setting ✓ Type II water resistance ✓ Non-staining ✓ Excellent adhesion to a variety of substrates including but not limited to HPL, veneer, particleboard, plywood, MDF, etc Product Data Sheet (E) Safety […]
Read moreHELMIBOND 8320-6 is a versatile polychloroprene based, waterborne contact adhesive used in the manufacture of steel fire doors. HELMIBOND 8320-6 is specially formulated to bond aggressively to all common steel door skins as well as honeycomb paper and EPS (Styrofoam) cores. Bonds made with HELMIBOND 8320-6 become stronger with time; maximum strength, heat resistance and […]
Read more
HELMIBOND 833 is a one part Type I water-resistant PVA adhesive. It is very fast setting with a long assembly time and good wet tack. It can also be hot pressed and used in applications that are radio frequency cured. ✓ Excellent water resistance ✓ Rigid bonds ✓ Fast drying ✓ Good wet tack Product […]
Read more
HELMIBOND 842 is a specially formulated PVA adhesive which features long open and closed working times but short press times. High tack and extended working time make it an excellent choice as a general purpose assembly adhesive PVA. ✓ Long closed working time; up to 20 minutes depending on materials ✓ Short press times; as […]
Read more
HELMIBOND 847 is a premium quality, fast setting, unextended, high strength PVA adhesive specifically designed for solid wood bonding. ✓ Fast setting ✓ No fillers – Tight, invisible glue lines ✓ High solids – Reduces/eliminates sunken glue lines ✓ High shear strength ✓ Versatile – Can be used to bond HPL, veneer, particle board, MDF […]
Read more
HELMIBOND 853 is a PVA used in conjunction with CATALYST 590 for Type II water resistance. It is fast setting and used for hot pressing, cold pressing, RF and general assembly. ✓ Fast setting ✓ Type II water resistance ✓ Non-staining ✓ High shear strength ✓ Good heat resistance ✓ Excellent machining characteristics ✓ Bonds […]
Read more
A versatile vinyl acetate adhesive with excellent bonds to a wide range of materials in addition to wood. Designed primarily for use with automated and manual postforming machinery, Helmibond 890 can be sprayed or roll coated for use in hot bonding, hot pressing, hot roll laminating, cold pressing and “pinch roll & stack” flat laminating […]
Read more
Versatile waterborne adhesive designed for postforming and flat laminating without the need for cold pressing. It can be applied by spray or glue spreader. Product can be roll coated or sprayed and processed by hot bonding, hot laminating, hot pressing, and pinch rolling and dead stacking. ✓ Waterborne ✓ Fast setting ✓ Excellent mileage ✓ […]
Read more
HELMICOL 3012 A & B is a 100% solids content, versatile epoxy adhesive that displays good adhesion to a wide variety of substrates and exhibits strong final bonds that are heat and moisture resistant. ✓ Low viscosity ✓ Good mileage ✓ 100% solids ✓ Wide range of adhesion ✓ Easy to apply ✓ Good pot […]
Read more
Two-Component (2K) Waterborne Spray Adhesive for immediate assembly in foam bonding, upholstery, fabric and other assembly applications. HELMIFAST 777 exhibits instant tack upon introduction of ACTIVATOR 7 to the spray process. MUST BE USED WITH ACTIVATOR 7 TO ACHIEVE PROPER ADHESIVE BOND. ✓ Immediate tack ✓ Excellent Green Strength ✓ Solvent-free, Zero VOCs ✓ Waterborne […]
Read more
One-component waterborne spray adhesive for immediate assembly in foam bonding, upholstery, and other assembly applications. Helmifast 778 exhibits instant tack, excellent green strength, and repositionability. One-sided application is possible in many uses. ✓ Immediate tack ✓ Waterborne ✓ Solvent-free, zero VOCs ✓ Excellent green strength ✓ High heat resistance ✓ Aggressive tack; Helmifast 778 permits […]
Read more
HELMIFAST 780 TURBO is a sprayable foam bonding adhesive designed to form immediate bonds in foam, mattress and upholstered furniture assembly applications. Used as a one-component adhesive, HELMIFAST 780 TURBO exhibits great performance in standard foam assembly applications. With a simple flick of a switch, transform HELMIFAST 780 TURBO instantly into a super aggressive, high performance, […]
Read more
Helmiprene 4009RD is a very fast drying, low viscosity contact cement with a very fine spray pattern, resulting in excellent coverage and savings in production time. It develops an aggressive tack and high green strength. The cured glue line of Helmiprene 4009RD is extremely tough yet flexible, and also exhibits good heat, moisture and oil […]
Read more